Assembly technology of bike

Insert your useful classic bike web links here......

Assembly technology of bike

Postby sanlly11 » Wed Mar 28, 2012 2:00 am

Assembly technology

If good parts are assembed badly, will like neither after building stylist careful design, also do not have experienced craftsmen to built a house, make your fear all day, for fear that it will collapse. So, if you don't want to buy the later regret, he should know these knowledge.

2. The bike comfortable function

A. transmission?

Many people mistakenly think bike is equipped with transmission in order to speed up the speed can ride, it is actually a maximum force can only 0.4 horsepower. The transmission is to help the people will be the greatest horsepower easily play tools just.

B. transmission have any good?

General bicycles in city use, within the city actually also has a lot of slope. Sometimes you would feel cycling feet suddenly heavy, with eyes cannot judge the slope of more often. At this time, the role of the gearbox can be fully reflected, if there is the transmission of words, this time as long as you can into the lighter gear can easy ride. Of course, also can use in against the wind.

The advantages of the transmission is that it can help you in physical strength not beautiful, effectively reduce your physical consumption. Such as colds, energy consumption can not be too big, so if you ride the choice is light gear ratio riding will be very relaxed. And women in poor health, students should try when tired, age shorter lengths can be flexible use of variable speed bike. So the benefits of variable speed car is really too much.

C. Previous variable speed drive SYSTEM need to micro adjust (now also is part of the variable speed car need to fine tune), but with the SIS (SHIMANO INDEX SYSTEM) successful development of the function, make a lot of bicycle are assembled SIS SYSTEM, shifting as long as the press when speed can be as "as" complete the noise of the variable speed, so don't worry about how to operate.
Posts: 1
Joined: Wed Mar 28, 2012 1:40 am

Re: Assembly technology of bike

Postby Paul in NZ » Wed Mar 28, 2012 2:36 am

Oh dear - gawd bless the internet....
Paul in NZ
Posts: 82
Joined: Sun Mar 25, 2012 10:56 pm

Re: Assembly technology of bike

Postby Stuart SS » Wed Mar 28, 2012 8:16 am


Like your input.. How about introducing yourself formally ~ Always appreciate a few pro-tech heads on board ~
User avatar
Stuart SS
Global Moderator
Posts: 1225
Joined: Sat Jun 27, 2009 5:59 am
Location: Or-strailia's tropical paradise; Far Far North Queensland !

Return to Useful Links

Who is online

Users browsing this forum: No registered users and 1 guest