1989 xt350 fork seal replacement.

Need technical help - Restoration help and tips, engine rebuild or just offer your knowledge or services - drop it in here.

1989 xt350 fork seal replacement.

Postby tunster » Sun Jul 26, 2009 7:56 pm

Ok this is where im at.I have removed the oil from the fork leg.I have taken off the wire spring from above the seal and i have un done the bolt at the bottom of the fork leg.Should the fork leg now just pull out of the stantion?
User avatar
tunster
 
Posts: 47
Joined: Fri Jul 17, 2009 7:48 pm
Location: not far from the devils arse!

Re: 1989 xt350 fork seal replacement.

Postby dig » Sun Jul 26, 2009 7:59 pm

Yes but it wont come easy,use the bottom slider as a slide hammer to drive the seal out. :63
User avatar
dig
Gone But Not Forgotten
 
Posts: 1141
Joined: Wed Jun 24, 2009 8:34 am
Location: new zealand

Re: 1989 xt350 fork seal replacement.

Postby tunster » Sun Jul 26, 2009 8:23 pm

Thanks dig i thought i might be missing something when it didnt come out and i didnt want to damage it.Time for brute force and ignorance. :150
User avatar
tunster
 
Posts: 47
Joined: Fri Jul 17, 2009 7:48 pm
Location: not far from the devils arse!

Re: 1989 xt350 fork seal replacement.

Postby tunster » Mon Jul 27, 2009 6:09 pm

Two good tugs and the bitch was out,YEEHAA!! now were cookin :501
User avatar
tunster
 
Posts: 47
Joined: Fri Jul 17, 2009 7:48 pm
Location: not far from the devils arse!


Return to The Classic Bike Workshop

Who is online

Users browsing this forum: No registered users and 3 guests

cron